Brought to you by How + Print

Atkins Backsaw


   
 

Restoring Saws, Saw Tools, and Other Equipment


 
  How I file a Saw by Matthew Cianci

1 of 4

 

A recent customer asked if I would document the process of taking his old Disston D-8 (below) and share pics with him. I agreed and thought it would also make a great post. Iíll try to let the pics do the talking.

Before I can file and sharpen I needed to smith the saw to remove a bit of a kink and bow. To do this I keep pressure on the plate by bending it down on the anvil and use a specially modified hammer.
 

 

Matthew Cianci

With the plate true once more, I had to address the sway to the toothline. You can see the dip from the heel towards the toe. This is very common and not helpful in sawing. You want a straight toothline or a slight crown. This saw needs a good jointing before filing.

Jointing a saw is just like jointing a board. I use an 8 or 10 inch mill file.


 
Learn how. Discover why. Build better.

1 of 4

 

Saws



Dovetail Saws


   

Copyright © 2005-2017, wkFineTools.com and Wiktor Kuc.  All Rights Reserved.  Designated trademarks and brands are the property of their respective owners.
No part of the content from this website can be reproduced by any means without specific permission of the publisher.
Valid CSS!